Cast Floating Ball Valve

KOSEN Cast Trunnion Ball Valve have been designed for severe oil and gas applications,including production,transportation and distribution.
KOSEN Cast Trunnion Ball Valve designed the Side-Entry Trunnion-Mounted Ball Valves to assure bi-directional sealing of the valve with two independent floating seats. The design of these seats minimizes the torque required to operate the valve without losing the sealing power. This power is assured by zero differential pressure to the valve's maximum rated pressure. In addition, these repairable valves are manufactured to seal off both seats at the same time and to allow bleeding of the entrapped cavity pressure (DBB) with the ball in the closed position. The DBB feature allows for verifying that the seats are properly sealing.

Fully Welded Ball Valves are especially designed for gas transportation and storage industries. The fully welded body design can prevent any potential external leakage from connection of body and bonnet. In addition, the forged body with the advantages of consistent grain size and even thickness. Thus it inherently eliminates the conventional casted valve material defects, such as: shrinkage, porosity. The fully-welded ball valve adopts forged material, welded body, instead of bolts and nuts, to aviod any potential leakage from body.The forged body with regular structure and even thickness can avoid shrinkage cavities, pin holes, cracks, sand holes and other defects occurring to casting body valves.Fully-welded ball valves can be spherical and cylindrical type. Usually the spherical type has only one welding seam on the body, the cylindrical type has two welding seam on the body.

KOSEN Cast Floating Ball Valves are designed manufactured to provide maximum service life and dependability. All ball valves are full ported and meet the design requirements of American Petroleum Institute Standard API 608&API 6D British standard BS5351 and generally conform to American Society of Mechanical engineers standard ASME B16.34 valves are available in a complete range of bady/bonnet materials and trims.

The DBB double ball valve is designed to replace the complicated connection of multiple valves in the traditional pipeline. Reduce the leakage point in the system, quickly achieve emissions and shut down function. The DBB double ball valve saves the installation space limit. The installation program is simplified. Reduce the pressure of the pipe system. It is convenient to clean and maintain the instrument and reduce the cost. DBB double ball valve has two series of full diameter and reduced diameter. The inside diameter of the full diameter ball valve is in line with the inner diameter of the pipeline, not only with small fluid resistance, but also convenient for pipeline cleaning. The fluid resistance of the shrink ball valve is much lower than that of the same caliber cut-off valve. The weight of the ball valve is about 30% lighter than that of the same caliber ball valve, which effectively reduces the cost and price of production, thus it has been widely used.