Forged Floating Ball Valve

The pneumatic ball valve is a pneumatic actuator with a ball valve. Pneumatic actuators perform relatively fast, and the fastest switching speed is 0.05 seconds / times, so it is usually called pneumatic quick shut-off of ball valves. The pneumatic ball valve is usually equipped with various accessories such as the solenoid valve, the gas source treatment triad, the limit switch, the locator, the control box, etc. to achieve local control and long distance centralized control. In the control room, the valve switch can be controlled. It does not need to run to the scene or at the high altitude and the dangerous zone. It saves human resources, time and safety.

Female threaded ball valve is a valve with 90°'s rotation to realize opening&closing which is widely used during last few years. Soft sealing electric female threaded ball valve is used in occation needing tight sealing, while metal to metal sealing electirc female threaded ball valve is chosen for high temperature or corrosive serving condition. Trunnion electric female threaded ball valve is suitable for big Nominal size or big pressure difference condition. The flowing characteristic of O type electric female threaded ball valve is linear while equal percentage characteristic for V type electric ball valve and eccentric valve, and these two types of valves could be used as regulating purpose.

Fully Welded Ball Valves are especially designed for gas transportation and storage industries. The fully welded body design can prevent any potential external leakage from connection of body and bonnet. In addition, the forged body with the advantages of consistent grain size and even thickness. Thus it inherently eliminates the conventional casted valve material defects, such as: shrinkage, porosity. The fully-welded ball valve adopts forged material, welded body, instead of bolts and nuts, to aviod any potential leakage from body.The forged body with regular structure and even thickness can avoid shrinkage cavities, pin holes, cracks, sand holes and other defects occurring to casting body valves.Fully-welded ball valves can be spherical and cylindrical type. Usually the spherical type has only one welding seam on the body, the cylindrical type has two welding seam on the body.

The cryogenic ball valve is applicable to different pipeline.By adopting different materials, the cryogenic ball valve is applicable to different working temperature and medium.The minimum temperature for the ball valve is -196 Degree C . The operation of the ball valve can be manual operated, gear operated, pneumatic operated and motor operated. The end connection usually is flanged ends. However, the welded ends are also optional.